---
title: Wizards
---
import Aside from "@components/Aside.astro"
import AutoScreenshot from "@components/AutoScreenshot.astro"
import UtilityInjection from "@components/UtilityInjection.astro"

## Introduction

Similar to [tabs](tabs), you may want to use a multistep wizard to reduce the number of components that are visible at once. These are especially useful if your form has a definite chronological order, in which you want each step to be validated as the user progresses.

```php
use Filament\Schemas\Components\Wizard;
use Filament\Schemas\Components\Wizard\Step;

Wizard::make([
    Step::make('Order')
        ->schema([
            // ...
        ]),
    Step::make('Delivery')
        ->schema([
            // ...
        ]),
    Step::make('Billing')
        ->schema([
            // ...
        ]),
])
```

<AutoScreenshot name="schemas/layout/wizard/simple" alt="Wizard" version="4.x" />

<Aside variant="tip">
    We have different setup instructions if you're looking to add a wizard to the creation process inside a [panel resource](../resources/creating-records#using-a-wizard) or an [action modal](../actions/modals#rendering-a-wizard-in-a-modal). Following that documentation will ensure that the ability to submit the form is only available on the last step of the wizard.
</Aside>

## Rendering a submit button on the last step

You may use the `submitAction()` method to render submit button HTML or a view at the end of the wizard, on the last step. This provides a clearer UX than displaying a submit button below the wizard at all times:

```php
use Filament\Schemas\Components\Wizard;
use Illuminate\Support\HtmlString;

Wizard::make([
    // ...
])->submitAction(view('order-form.submit-button'))

Wizard::make([
    // ...
])->submitAction(new HtmlString('<button type="submit">Submit</button>'))
```

Alternatively, you can use the built-in Filament button Blade component:

```php
use Filament\Schemas\Components\Wizard;
use Illuminate\Support\Facades\Blade;
use Illuminate\Support\HtmlString;

Wizard::make([
    // ...
])->submitAction(new HtmlString(Blade::render(<<<BLADE
    <x-filament::button
        type="submit"
        size="sm"
    >
        Submit
    </x-filament::button>
BLADE)))
```

You could extract this component to a separate Blade view if you prefer.

## Setting a step icon

Steps may have an [icon](../styling/icons), which you can set using the `icon()` method:

```php
use Filament\Schemas\Components\Wizard\Step;
use Filament\Support\Icons\Heroicon;

Step::make('Order')
    ->icon(Heroicon::ShoppingBag)
    ->schema([
        // ...
    ]),
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `icon()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

<AutoScreenshot name="schemas/layout/wizard/icons" alt="Wizard with step icons" version="4.x" />

## Customizing the icon for completed steps

You may customize the [icon](#setting-up-step-icons) of a completed step using the `completedIcon()` method:

```php
use Filament\Schemas\Components\Wizard\Step;
use Filament\Support\Icons\Heroicon;

Step::make('Order')
    ->completedIcon(Heroicon::HandThumbUp)
    ->schema([
        // ...
    ]),
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `completedIcon()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

<AutoScreenshot name="schemas/layout/wizard/completed-icons" alt="Wizard with completed step icons" version="4.x" />

## Adding descriptions to steps

You may add a short description after the title of each step using the `description()` method:

```php
use Filament\Schemas\Components\Wizard\Step;

Step::make('Order')
    ->description('Review your basket')
    ->schema([
        // ...
    ]),
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `description()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

<AutoScreenshot name="schemas/layout/wizard/descriptions" alt="Wizard with step descriptions" version="4.x" />

## Setting the default active step

You may use the `startOnStep()` method to load a specific step in the wizard:

```php
use Filament\Schemas\Components\Wizard;

Wizard::make([
    // ...
])->startOnStep(2)
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `startOnStep()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

## Allowing steps to be skipped

If you'd like to allow free navigation, so all steps are skippable, use the `skippable()` method:

```php
use Filament\Schemas\Components\Wizard;

Wizard::make([
    // ...
])->skippable()
```

Optionally, the `skippable()` method accepts a boolean value to control if the step is skippable or not:

```php
use Filament\Schemas\Components\Wizard\Step;

Step::make('Order')
    ->skippable(FeatureFlag::active())
    ->schema([
        // ...
    ]),
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `skippable()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

## Persisting the current step in the URL's query string

By default, the current step is not persisted in the URL's query string. You can change this behavior using the `persistStepInQueryString()` method:

```php
use Filament\Schemas\Components\Wizard;

Wizard::make([
    // ...
])->persistStepInQueryString()
```

When enabled, the current step is persisted in the URL's query string using the `step` key. You can change this key by passing it to the `persistStepInQueryString()` method:

```php
use Filament\Schemas\Components\Wizard;

Wizard::make([
    // ...
])->persistStepInQueryString('wizard-step')
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `persistStepInQueryString()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

## Step lifecycle hooks

You may use the `afterValidation()` and `beforeValidation()` methods to run code before and after validation occurs on the step:

```php
use Filament\Schemas\Components\Wizard\Step;

Step::make('Order')
    ->afterValidation(function () {
        // ...
    })
    ->beforeValidation(function () {
        // ...
    })
    ->schema([
        // ...
    ]),
```

<UtilityInjection set="schemaComponents" version="4.x">You can inject various utilities into the `afterValidation()` and `beforeValidation()` functions as parameters.</UtilityInjection>

### Preventing the next step from being loaded

Inside `afterValidation()` or `beforeValidation()`, you may throw `Filament\Support\Exceptions\Halt`, which will prevent the wizard from loading the next step:

```php
use Filament\Schemas\Components\Wizard\Step;
use Filament\Support\Exceptions\Halt;

Step::make('Order')
    ->afterValidation(function () {
        // ...

        if (true) {
            throw new Halt();
        }
    })
    ->schema([
        // ...
    ]),
```

## Using grid columns within a step

You may use the `columns()` method to customize the [grid](layouts#grid-system) within the step:

```php
use Filament\Schemas\Components\Wizard;
use Filament\Schemas\Components\Wizard\Step;

Wizard::make([
    Step::make('Order')
        ->columns(2)
        ->schema([
            // ...
        ]),
    // ...
])
```

<UtilityInjection set="schemaComponents" version="4.x">As well as allowing a static value, the `columns()` method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

## Customizing the wizard action objects

This component uses action objects for easy customization of buttons within it. You can customize these buttons by passing a function to an action registration method. The function has access to the `$action` object, which you can use to [customize it](../actions/overview). The following methods are available to customize the actions:

- `nextAction()`
- `previousAction()`

Here is an example of how you might customize an action:

```php
use Filament\Actions\Action;
use Filament\Schemas\Components\Wizard;

Wizard::make([
    // ...
])
    ->nextAction(
        fn (Action $action) => $action->label('Next step'),
    )
```

<UtilityInjection set="formFields" version="4.x" extras="Action;;Filament\Actions\Action;;$action;;The action object to customize.">The action registration methods can inject various utilities into the function as parameters.</UtilityInjection>